Get premium membership and access revision papers, questions with answers as well as video lessons.
Basic Electrical Power Question Paper
Basic Electrical Power
Course:Bachelor Of Technology In Electrical And Computer Engineering
Institution: Moi University question papers
Exam Year:2012
2011/2012 ACADEMIC YEAR
SECOND YEAR FIRST SEMESTER EXAMINATIONS
FOR THE DEGREE OF
BACHELOR OF TECHNOLOGY
IN
ELECTRICAL AND COMPUTER ENGINEERING
COURSE CODE: ECE 272
COURSE TITLE: BASIC ELECTRICAL POWER
DATE: TIME:
INSTRUCTIONS TO CANDIDATES
ATTEMPT ANY FIVE OF THE FOLLOWING SEVEN QUESTIONS
THIS PAPER CONSISTS OF (3) PRINTED PAGES PLEASE TURN OVER
QUESTION ONE
1 a)(i)Explain the essential factors that influence the choice of site for a hydro-electric plant. (4 marks)
(ii)Explain the functions of the following; dam, spillways, surge tank, headworks and penstock (5 marks)
b) A hydro-electric power station has reservoir area of 2.4 km2 and capacity 5 x 106 M3.The effective head of water is 100M.The penstock, turbine and generator efficiencies are respectively 95%,90% and 85%.Find;
(i) The total electrical energy that can be generated from the power station.
(ii)If a load of 15,000 kw has been supplied for 3hrs, find the fall in reservoir level. (5 marks)
QUESTION TWO
2 a) Explain the meaning of the following terms as applied to power generation;
(i)Load Curve.
(ii) Maximum Demand.
(iii) Load Factor.
(iv) Diversity Factor. (4 marks)
b) An equipment in a power station costs Ksh.1,560,000 and has a salvage value of Ksh.60,000 at the end of 25 years .Determine the depreciated value of the equipment after 20 yrs using the following methods;
(i) Straight line method
(ii) Diminishing value method
(iii) Sinking fund method at 5% compound interest annually. (6 marks).
c) Explain two advantages of having a high load factor. (4 marks)
QUESTION THREE
a) Give five desirable characteristics of a tariff. (5 marks)
b) Calculate annual bill of a customer whose maximum demand is 100kw,p.f = 0.8 lagging and a load
factor of 60%.The tariff used is Ksh.75 per Kva of maximum demand plus 15 cts per kWh consumed.
(3 marks)
c) Explain the following methods of tariff;
(i)Block rate
(ii)Two-part tariffs (2 marks)
d) A tariff in force is Ksh.50 per Kva of maximum demand per year plus 10 cts per kWh.A consumer has a maximum demand of 10 Kw with a load factor of 60% and a p.f of 0.8 lag. Show the effect of improving the load factor to 80% with the same maximum demand and p.f on the total cost per kWh. (4 marks)
QUESTION FOUR
4 a) Explain four disadvantages of low power factor. (4 marks)
b) A 3-phase induction motor operates on full load with efficiency of 89% and a p.f of 0.85 lagging. Calculate the Kva rating of capacitor bank required to raise full load the power factor at 0.95 lagging. What will be the capacitance per phase if the capacitors are connected in (i) delta (ii) star (6 marks)
c) Show that for consumer taking power of P Kw at a power factor cos?1 charged at Ksh A per kVA maximum demand plus a flat rate per kWh,the most economical power factor after installing a power factor improvement equipment should be;
cos?2 =
Where cos?2 = power factor after correction
B = the cost of per Kvar of the p.f correction equipment. (4 marks)
QUESTION FIVE
5 a) With respect to phases name six systems that are available for A.C distribution; (6 marks)
b) (i) Why is electrical power normally transmitted at high voltage? (1 marks)
(ii) A single-phase line has an impedance of 5 °? and supplies a load of 120A, 3,300V
at 0.8 p.f lagging. Draw a vector diagram and use it to calculate the sending-end voltage. (3 marks)
c) An overhead, single phase-phase transmission line delivers 1100Kw at 33kV at 0.8 p.f lagging. The total resistance of the line is 10O and a total inductive reactance is 15 O..Determine;
(i) Transmission efficiency
(ii) Sending-end voltage
(iii) Sending-end p.f. (4 marks)
QUESTION SIX
6 a) with the help of a neat sketch give a brief outline of a typical A.C power supply scheme showing the following parts; ( 7 marks)
(i) Generating station
(ii) Primary transmission
(iii) Secondary transmission
(iv)Primary distribution
(v) Secondary distribution
b) Give any four advantages of high voltage D.C transmission over high voltage A.C transmission. (4marks)
c) Give any three disadvantages of high voltage D.C transmission over high voltage A.C transmission.
(3 marks)
QUESTION SEVEN
7 a) Outline six advantages of electric heating over other methods of heating. (6 marks)
b) With the help of a well labeled diagram explain the working principle of fluorescent mercury-vapour
lamps.
(5 marks)
c) Explain the formation of electric arc (3 marks)
More Question Papers