Get premium membership and access questions with answers, video lessons as well as revision papers.
CASE FOR:
1. Infant Industry Argument – If an industry is just developing, with a good chance of success once it is established and reaping economies of scales, then it is necessary to protect it from (external) competition temporarily until it reaches levels of production and costs which allow it to compete effectively with established industries elsewhere. This argument is most commonly used to justify the high level of protection that surrounds the manufacturing industry in developing countries, as they attempt to replace foreign goods with those produced/made in their own country (import substitution strategy).
2. Cheap Lab our – It?s often argued that the economy must be protected from imports which are produced with cheap labor; that buying foreign goods (imports) from low wage countries amounts not only to unfair competition, but continues to encourage the exploitation of cheap labor in those countries as well as undermining the standard of living of those in high wage economies.
3. Dumping – Dumping occurs where goods are sold in a foreign market at prices below their cost of production or at prices below the prices in the country of origin. This may be undertaken either by a foreign monopolist, using high profits at home to subsidize exports for political or strategic reason. Countries in which such products are sold feel justified in undertaking protectionism. This is because dumping could result in the elimination of home industries, and the country then becomes dependent on foreign goods which (although cheap in relative terms)have no guaranteed quality standards.
4. Balance of payments (BOP) and Budget Deficits – If a country had a persistent BOP deficit, it?s unlikely to be able to finance from its limited reserves. It therefore becomes necessary for it to adopt some form of restriction on imports e.g. tariffs which also act as a source of revenue.
5. Danger of over-specializing – A country may feel that in its long-term interest it should not be too specialized.A country may not wish to abandon production of certain key commodities even though the foreign product is more competitive, because it will then be too dependent on imports. In future, prices of such goods may rise or supplies may diminish. It is for this reason that countries wish to remain largely self-sufficient (e.g. in food – as a security); Specialization gains in terms of comparative advantage could be enjoyed in the meantime, but in future, demand may fall and the country suffers disproportionately (e.g. loss/reduction of foreign exchange earnings). In this case, a country will then diversify into production of other goods while restricting importation of same or similar products.
6.Strategic Reasons – a country may find it?s not in its interest to be dependent on imports, and can protect a home industry regardless of its efficiency status. Many countries maintain industries for strategic reasons e.g. the steel industry, shipping, agriculture etc
7. Structural unemployment – decline of a highly localized industry due to international trade causes great problems of regional (structural) unemployment. If it would take time to re-locate labor to other jobs/sectors, then the government, under considerable political and humanitarian pressure, tends to restrict the imports that are causing the industry to decline.
8.Bargaining power – even when a country sees no economic benefit in protection, it may find it useful and effective to maintain (impose) tariffs and /or other forms of restriction as bargaining gambits in negotiating better terms with other countries.
CASE AGAINST:
1. Free Trade Argument – This maintains that free trade allows all countries to specialize in producing commodities in which they have comparative advantage. They can produce and consume more of all commodities than would be available if specialization had not taken place. By implication, any quotas, tariffs, other forms of import controls and/or export subsidies would interfere with the overall advantages from free trade and thereby making less efficient the use of world resources.
2. Monopoly Power – Protection could make industries with high capital base to develop monopoly power, and such power is socio-economically undesirable in terms of output restriction (output deficiency) and considerably higher prices, which militate against living standards (welfare).
3. Retaliation – Advocate of free trade also advance the argument that if one country imposes import restrictions, then those countries adversely affected will impose retaliatory restrictions on its exports and thereby ending up not having any gainful net effect. This could also lead to a tariff war which no country can benefit from, and which contracts the volume of world trade on which every country?s international prosperity depends.
4. Inflation – If key foreign goods are not free to enter the country (or cost more), prices tend to increase, leading to increased level of inflation
5. Inefficiency – where there is protection against foreign competition, the industries (sectors) enjoying this shade tend to be slow in instituting efficiency enhancing systems (such as paying due regard to research and development) with a view to meeting international quality standards specifications. Kenya, for instance, cannot achieve its 2020 industrialization dream without efficiency (in both public and private sectors).
Wilfykil answered the question on February 7, 2019 at 06:09
- Distinguish between a tariff and a quota as applied in International Trade.(Solved)
Distinguish between a tariff and a quota as applied in International Trade.
Date posted: February 7, 2019. Answers (1)
- Under what conditions is price discrimination possible?(Solved)
Under what conditions is price discrimination possible?
Date posted: February 7, 2019. Answers (1)
- You have been hired as a consultant by a firm producing bread to advise on a pricing strategy that would
enable the firm to maximize profits....(Solved)
You have been hired as a consultant by a firm producing bread to advise on a pricing strategy that would
enable the firm to maximize profits. This firm is a monopolist which sells in two distinct markets, one of
which is completely sealed off from the other.
As part of the analysis, you establish that the total demand for the firm‟s output is given by the
following equation:
Q = 50 – 0.5P
and the demand for the firm‟s output in the two markets is given by the following equations:
Q1 = 32 – 0.4P1 and
Q2 = 18 – 0.1 P2
Where: Q = total output
P = Price
Q1 = Output sold in Market 1
Q2 = Output sold in Market 2
P1 = Price charged in Market 1
P2 = Price charged in Market 2
The cost of production is given by C = 50 + 40Q
Where C = total cost of producing bread.
How much profit would the firm earn if it sold the output at a single price, and if it discriminates?
Date posted: February 7, 2019. Answers (1)
- You have been hired as a consultant by a firm producing bread to advise on a pricing strategy that would
enable the firm to maximize profits....(Solved)
You have been hired as a consultant by a firm producing bread to advise on a pricing strategy that would
enable the firm to maximize profits. This firm is a monopolist which sells in two distinct markets, one of
which is completely sealed off from the other.
As part of the analysis, you establish that the total demand for the firm‟s output is given by the
following equation:
Q = 50 – 0.5P
and the demand for the firm‟s output in the two markets is given by the following equations:
Q1 = 32 – 0.4P1 and
Q2 = 18 – 0.1 P2
Where: Q = total output
P = Price
Q1 = Output sold in Market 1
Q2 = Output sold in Market 2
P1 = Price charged in Market 1
P2 = Price charged in Market 2
The cost of production is given by C = 50 + 40Q
Where C = total cost of producing bread.
What price must be charged in each market in order to maximize profits?
Date posted: February 7, 2019. Answers (1)
- You have been hired as a consultant by a firm producing bread to advise on a pricing strategy that would
enable the firm to maximize profits....(Solved)
You have been hired as a consultant by a firm producing bread to advise on a pricing strategy that would
enable the firm to maximize profits. This firm is a monopolist which sells in two distinct markets, one of
which is completely sealed off from the other.
As part of the analysis, you establish that the total demand for the firm‟s output is given by the
following equation:
Q = 50 – 0.5P
and the demand for the firm‟s output in the two markets is given by the following equations:
Q1 = 32 – 0.4P1 and
Q2 = 18 – 0.1 P2
Where: Q = total output
P = Price
Q1 = Output sold in Market 1
Q2 = Output sold in Market 2
P1 = Price charged in Market 1
P2 = Price charged in Market 2
The cost of production is given by C = 50 + 40Q
Where C = total cost of producing bread.
Determine the total output that the firm must produce in order to maximize profits.
Date posted: February 7, 2019. Answers (1)
- Given a hypothetical consumption function of the form:
C = a + bYd
Where Yd = Y – T
And Y = Income
...(Solved)
Given a hypothetical consumption function of the form:
C = a + bYd
Where Yd = Y – T
And Y = Income
T = Taxes and that:
Government spending and investment are exogenously determined at G and I respectively: Determine Government Spending
Multiplier.
Date posted: February 7, 2019. Answers (1)
- What is the relationship between the simple multiplier and marginal propensity to consume?(Solved)
What is the relationship between the simple multiplier and marginal propensity to consume?
Date posted: February 7, 2019. Answers (1)
- Based on the circular flow of income analysis, explain why marginal propensity to consumer
plus marginal propensity to save equals one.(Solved)
Based on the circular flow of income analysis, explain why marginal propensity to consumer
plus marginal propensity to save equals one.
Date posted: February 7, 2019. Answers (1)
- Explain how the concept of elasticity guides decisions in price discrimination by a monopolist(Solved)
Explain how the concept of elasticity guides decisions in price discrimination by a monopolist
Date posted: February 6, 2019. Answers (1)
- Explain how the concept of elasticity guides decisions in devaluation policy to encourage exports and discourage imports(Solved)
Explain how the concept of elasticity guides decisions in devaluation policy to encourage exports and discourage imports
Date posted: February 6, 2019. Answers (1)
- Explain how the concept of elasticity guides decisions in government?s tax policy on household consumption(Solved)
Explain how the concept of elasticity guides decisions in government‟s tax policy on household consumption
Date posted: February 6, 2019. Answers (1)
- The demand and supply schedules for carrots in a certain market are given below:
Determine the equilibrium quantity and price by graphical method(Solved)
The demand and supply schedules for carrots in a certain market are given below:
Determine the equilibrium quantity and price by graphical method
Date posted: February 6, 2019. Answers (1)
- In a certain economy the marginal propensity to save is 0.2 and the autonomous consumption equals
400. If the Government?s expenditures were to increase by 50%...(Solved)
In a certain economy the marginal propensity to save is 0.2 and the autonomous consumption equals
400. If the Government‟s expenditures were to increase by 50% what would be the resultant change in National income.
Date posted: February 6, 2019. Answers (1)
- In a certain economy the marginal propensity to save is 0.2 and the autonomous consumption equals
400. Formulate the consumption function.(Solved)
In a certain economy the marginal propensity to save is 0.2 and the autonomous consumption equals
400. Formulate the consumption function.
Date posted: February 6, 2019. Answers (1)
- In the context of international trade, explain the concept of comparative advantage with specialization(Solved)
In the context of international trade, explain the concept of comparative advantage with specialization
Date posted: February 6, 2019. Answers (1)
- What is meant by the term international trade?(Solved)
What is meant by the term international trade?
Date posted: February 6, 2019. Answers (1)
- Explain the economic effects of a high rate of inflation(Solved)
Explain the economic effects of a high rate of inflation
Date posted: February 6, 2019. Answers (1)
- What are the major causes of inflation?(Solved)
What are the major causes of inflation?
Date posted: February 6, 2019. Answers (1)
- Define inflation.(Solved)
Define inflation.
Date posted: February 6, 2019. Answers (1)
- Explain what fiscal policy entails.(Solved)
Explain what fiscal policy entails.
Date posted: February 6, 2019. Answers (1)