- State the law of conservation of energy(Solved)
State the law of conservation of energy
Date posted: April 2, 2019. Answers (1)
- The diagram below shows a charcoal refrigerator. (i) Explain why charcoal is used and why it is sprinkled with water...(Solved)
The diagram below shows a charcoal refrigerator.
(i) Explain why charcoal is used and why it is sprinkled with water
(ii) What is the role of the metallic tank and the wire mesh
Date posted: April 2, 2019. Answers (1)
- Briefly explain two ways other than direct heating by which quantity of liquid may be made to evaporate more quickly(Solved)
Briefly explain two ways other than direct heating by which quantity of liquid may be made to evaporate more quickly
Date posted: April 2, 2019. Answers (1)
- 0.5kg of naphthalene contained in an aluminium can of mass 0.4kg is melted in a water bath and raised to a temperature of 100oC ....(Solved)
0.5kg of naphthalene contained in an aluminium can of mass 0.4kg is melted in a water bath and raised to a temperature of 100oC . Calculate the total heat given out when the can and its contents are allowed to cool to room temperature, 20oC . Neglect losses by evaporation during heating process and give your answer to the nearest kilojoule.(For naphthalene melting point = 80oC , Specific heat capacity for both liquid and solid =2100J/KgK; specific latent heat of fusion = 170000J/Kg.For aluminium: specific heat capacity = 900J/Kg/k
Date posted: April 2, 2019. Answers (1)
- An electric heater 1KW 240V is used to raise the temperature of a 5kg copper block from 15oC to 33oC. If the specific heat capacity...(Solved)
An electric heater 1KW 240V is used to raise the temperature of a 5kg copper block from 15oC to 33oC. If the specific heat capacity of copper is 400J/Kg/K and assuming no heat is lost to the surrounding,Calculate the time taken.
Date posted: April 2, 2019. Answers (1)
- Explain why steel feels colder than wood at the same temperature.(Solved)
Explain why steel feels colder than wood at the same temperature.
Date posted: April 2, 2019. Answers (1)
- Figure below shows a test tube partially filled with water. An ice wrapped in wire gauze is placed at the bottom of the test-tube. It...(Solved)
Figure below shows a test tube partially filled with water. An ice wrapped in wire gauze is placed at the bottom of the test-tube. It is then held in the flame of a bunsen burner as shown below
State and explain what will be observed after some time
Date posted: April 2, 2019. Answers (1)
- The figure below shows two identical thermometers. Thermometer A has a blackened bulb while thermometer B has a silvery bulb. A candle is placed equidistant between...(Solved)
The figure below shows two identical thermometers. Thermometer A has a blackened bulb while thermometer B has a silvery bulb. A candle is placed equidistant between the two thermometers.
State with a reason the observations made after some time
Date posted: April 2, 2019. Answers (1)
- Figure below shows a cross-section of a vacuum flask (i) Name the parts labelled A and B on the diagram...(Solved)
Figure below shows a cross-section of a vacuum flask
(i) Name the parts labelled A and B on the diagram
(ii) Explain how the heat losses are minimized when hot liquid is poured into the flask
Date posted: April 2, 2019. Answers (1)
- A jet delivering 0.44g of dry steam per second, at 100oC is directed on to crushed ice at 0.0oC contained in an unlagged copper can...(Solved)
A jet delivering 0.44g of dry steam per second, at 100oC is directed on to crushed ice at 0.0oC contained in an unlagged copper can which has a hole in the base. 4.44g of water at 0.0oC flow out of the hole per second.
(i) How many joules of heat are given out per second by condensing steam and cooling to 0.0oC of water formed?(Latent heat of vaporization of steam = 2.26 x 106JKg-1,c for water = 4200JKg-1K-1)
(ii) How much heat is taken in per second by the ice which melts?
(iii) Suggest why these amounts above are different
Date posted: April 2, 2019. Answers (1)
- A block of metal of mass 150g at 100oC is dropped into a logged calorimeter of heat capacity
40J/k containing 100g of water at 25oC. The...(Solved)
A block of metal of mass 150g at 100oC is dropped into a logged calorimeter of heat capacity
40J/k containing 100g of water at 25oC. The temperature of the resulting mixture is 34oC.
(Specific heat capacity of water = 4200J/KgK)
Determine;-
(i) Heat gained by calorimeter
(ii) Heat gained by water
(iii) Heat lost by the metal block
(iv) Specific heat capacity of the metal block
Date posted: April 2, 2019. Answers (1)
- 200g of a solid was uniformly heated by a 0.2 kw heater for sometime. The graph in the figure below shows how the temperature of...(Solved)
200g of a solid was uniformly heated by a 0.2 kw heater for sometime. The graph in the figure below shows how the temperature of the solid changed with time.
(i) Explain what is happening between OA and AB.
(ii) Calculate the specific heat capacity of the solid.
(iii) Calculate the specific latent heat of fusion k of the solid.
Date posted: April 2, 2019. Answers (1)
- A block of metal of mass 300g at 1000c is dropped into a logged calorimeter of heat capacity40Jk-1, containing 200g of water at 200c. The...(Solved)
A block of metal of mass 300g at 1000c is dropped into a logged calorimeter of heat capacity40Jk-1, containing 200g of water at 200c. The temperature of the resulting mixture is 340c
Determine:
(i) Heat gained by calorimeter.
(ii) Heat gained by water.
(iii) Heat lost by the metal block.
(iv) Specific heat capacity of the metal block.
Date posted: April 2, 2019. Answers (1)
- A mass of 2kg is attached to a string of length 50 cm. It is whirled in a circle in a vertical plane
at 10 revolution...(Solved)
A mass of 2kg is attached to a string of length 50 cm. It is whirled in a circle in a vertical plane
at 10 revolution per second about a horizontal axis. Calculate the tension in the string when the
mass is at the :-
(a)Highest point of the circle.
(b) Lowest part of the circle.
Date posted: April 2, 2019. Answers (1)
- A wooden block of mass 200g is placed at various distances from the center of a turntable,which is rotating at constant angular velocity. It is...(Solved)
A wooden block of mass 200g is placed at various distances from the center of a turntable,which is rotating at constant angular velocity. It is found that at a distance of 8.0cm from the center, the block just starts to slide off the table. If the force of friction between the block and the table is 0.4N, Calculate:
(i) The angular velocity of the table
(ii) The force required to hold the block at a distance of 12cm from the center of the table
Date posted: April 2, 2019. Answers (1)
- A small pendulum bob having a mass of 150g is suspended by an inelastic string of length 0.5m. The mass is made to rotate in...(Solved)
A small pendulum bob having a mass of 150g is suspended by an inelastic string of length 0.5m. The mass is made to rotate in a horizontal circle of radius 0.4m and whose centre is vertically below the point of suspension
(i) Determine the tension in the string
(ii) State one application of the pendulum
Date posted: April 2, 2019. Answers (1)
- The figure below shows an object of mass 0.2kg whirled in a vertical cycle of radius 0.5m at uniform speed of 5m/s(Solved)
The figure below shows an object of mass 0.2kg whirled in a vertical cycle of radius 0.5m at uniform speed of 5m/s
Determine
(i) The tension in the string at position A
(ii) The tension in the string at position B
(iii) The tension in the string at position C
(iv) From the values obtained in (i) (ii) and (iii) above, determine the point the string will most
likely snap. Explain
Date posted: April 2, 2019. Answers (1)
- Explain why a cyclist going round a bend at high speed tilts inwards(Solved)
Explain why a cyclist going round a bend at high speed tilts inwards
Date posted: April 2, 2019. Answers (1)
- A car of mass 1.5 x 103kg negotiates a level round about of radius 20m at a speed of
10m/s. Calculate the centripetal force acting on...(Solved)
A car of mass 1.5 x 103kg negotiates a level round about of radius 20m at a speed of
10m/s. Calculate the centripetal force acting on the car
Date posted: April 2, 2019. Answers (1)
- A fun fair ride of diameter 12m makes 0.5 revolutions per second.
(Solved)
A fun fair ride of diameter 12m makes 0.5 revolutions per second.
(i) Determine the periodic time, T, of the revolutions.
(ii) Determine its angular velocity.
(iii) Determine the linear velocity of the child riding in it.
(iv) If the mass of the child is 30 kg, find the centripetal force that keeps the child in the
motion.
Date posted: April 2, 2019. Answers (1)