Get premium membership and access questions with answers, video lessons as well as revision papers.
Power consumed for 30days
= 1.5 x 2 x 30 = 90KW
Cost of the electricity consumed
= 90KW x 6.70= Kshs.603.
sharon kalunda answered the question on April 5, 2019 at 10:25
- The diagram below shows a wrongly wired three pin plug.(Solved)
The diagram below shows a wrongly wired three pin plug.
(i) Indicate in the diagram above the correct colors for the wiring
(ii) State the use of device marked X
Date posted: April 5, 2019. Answers (1)
- Aluminium wires are commonly used in power transmission than copper wires. Give two
advantages of aluminum as transmission lines(Solved)
Aluminium wires are commonly used in power transmission than copper wires. Give two
advantages of aluminum as transmission lines
Date posted: April 5, 2019. Answers (1)
- State the advantage of transmitting power at Alternating voltage.(Solved)
State the advantage of transmitting power at Alternating voltage.
Date posted: April 5, 2019. Answers (1)
- State the advantage of transmitting power at Very high voltage(Solved)
State the advantage of transmitting power at Very high voltage
Date posted: April 5, 2019. Answers (1)
- The figure below represents part of an electric cooker coil.(Solved)
The figure below represents part of an electric cooker coil.
i) State why the part labeled W is coiled
(ii) State the property of material X that makes it suitable for its use
Date posted: April 5, 2019. Answers (1)
- State two ways of decreasing capacitance(Solved)
State two ways of decreasing capacitance
Date posted: April 5, 2019. Answers (1)
- The figure below shows the wiring in a modern mains appliance(Solved)
The figure below shows the wiring in a modern mains appliance
Identify the wires Y and Z
Date posted: April 5, 2019. Answers (1)
- Study the circuit below:(Solved)
Study the circuit below:
Determine the current flowing in the circuit
Date posted: April 5, 2019. Answers (1)
- You are provided with the following; a photo cell; a source of UV light, a rheostat,
a source of e.m.f, a millimeter, a voltmeter and connecting...(Solved)
You are provided with the following; a photo cell; a source of UV light, a rheostat,
a source of e.m.f, a millimeter, a voltmeter and connecting wires. Draw a circuit
diagram to show how photoelectric effect may be demonstrated in the laboratory
Date posted: April 5, 2019. Answers (1)
- A transformer with 4200 turns in the primary coil operates a 240V mains supply and gives an
output of 8.0V. Determine the number of turns in...(Solved)
A transformer with 4200 turns in the primary coil operates a 240V mains supply and gives an
output of 8.0V. Determine the number of turns in the secondary coil (assuming it is 10% efficient)
Date posted: April 5, 2019. Answers (1)
- Two fixed resistors one of 100 ohms and the other of unknown resistance are connected in parallel.
The combination is placed in a circuit and current...(Solved)
Two fixed resistors one of 100 ohms and the other of unknown resistance are connected in parallel.
The combination is placed in a circuit and current passing through the combination was
measured for various p.d. The graph in figure 10 below drawn to scale shows the results:-
(i) From the graph, calculate the total resistance of the combination
(ii) Determine the value of the unknown resistance
Date posted: April 5, 2019. Answers (1)
- The diagram figure below shows a photocell connected in a circuit:-(Solved)
The diagram figure below shows a photocell connected in a circuit:-
(i) Complete the diagram by indicating the correct polarities in the gap for current to flow in
the circuit.
(ii) State and explain the effect of using light of different wave lengths on the amount of
current flowing in the circuit given that the distance of the source of light remains the same
Date posted: April 5, 2019. Answers (1)
- In an experiment using a photo cell, ultra violet light of varying frequency strikes a metal
surface. The maximum Kinetic energy (KE max) of the frequency...(Solved)
In an experiment using a photo cell, ultra violet light of varying frequency strikes a metal
surface. The maximum Kinetic energy (KE max) of the frequency F is measured. The graph
below shows how the maximum kinetic energy varies with frequency F
Use the graph to determine:-
i) Threshold frequency F
ii) The plank’s constant, h
iii) Work function of the metal
Date posted: April 5, 2019. Answers (1)
- The diagram below represents a cathode ray oscilloscope (CRO)(Solved)
The diagram below represents a cathode ray oscilloscope (CRO)
i) Name the parts labeled A and B
ii) What are the functions of C and D?
iii) State how electrons are produced
iv) Give a reason why the tube is evacuated.
Date posted: April 5, 2019. Answers (1)
- State one reason why a C.R.O is a more accurate voltmeter than a moving coil voltmeter(Solved)
State one reason why a C.R.O is a more accurate voltmeter than a moving coil voltmeter
Date posted: April 5, 2019. Answers (1)
- The graph below shows the relation between the stopping potential, Vs and the frequency of radiation when a certain surface is illuminated with light of...(Solved)
The graph below shows the relation between the stopping potential, Vs and the frequency of radiation when a certain surface is illuminated with light of different frequencies
From the graph determine:-
(i) The threshold frequency
(ii) The value of plank’s constant (e = 1.6 x 10-19C)
(iii) The work function of the material
Date posted: April 5, 2019. Answers (1)
- The time base of a CRO is 25ms/div while its gain is 2.5V/div. Use this information to
answer the questions that follow:
(Solved)
The time base of a CRO is 25ms/div while its gain is 2.5V/div. Use this information to
answer the questions that follow:
i) Calculate the frequency of the signal
ii) What is the peak voltage of the signal
Date posted: April 5, 2019. Answers (1)
- Explain why a magnetic field is used in the TV deflection system instead of an electric field(Solved)
Explain why a magnetic field is used in the TV deflection system instead of an electric field
Date posted: April 5, 2019. Answers (1)
- Name one factor that determines the velocity of photoelectrons produced on a metal surface
when light shine on it(Solved)
Name one factor that determines the velocity of photoelectrons produced on a metal surface
when light shine on it
Date posted: April 5, 2019. Answers (1)
- Calculate the wavelength of Green light whose energy is 3.37 x 10-19 J .
(h = 6.63 x 10-34JS, C = 3.0 x 108m/s)(Solved)
Calculate the wavelength of Green light whose energy is 3.37 x 10-19 J .
(h = 6.63 x 10-34JS, C = 3.0 x 108m/s)
Date posted: April 5, 2019. Answers (1)