over-sowing is the technique of sowing/growing grasses without following the land preparation procedures like seedbed preparation
The following are the advantages of over-sowing
1. Availability of adequate moisture for germination to take place.
2. prevents soil erosion and repair patches, due to the ground cover provided by the already existing crops, soil erosion will be reduced
3. over-sowing also reduces the risk of overtaking weeds because of the good ground cover that will be created, the ground cover will help in reducing competition between the weeds and the lawn or any plant of interest.
4. Over-sowing can also be done in areas where ploughing is hard or impossible like rocky places
felixsereti answered the question on August 19, 2019 at 11:34
- Low volume and high volume pesticide applications are some of the chemical applications technique. Quantify the statement by discussing the methods.(Solved)
Low volume and high volume pesticide applications are some of the chemical applications technique. Quantify the statement by discussing the methods.
Date posted: April 11, 2019. Answers (1)
- Discuss the following techniques as used in pesticide application.
a)Ultra low volume spraying.
b)Electrostatic spraying.(Solved)
Discuss the following techniques as used in pesticide application:
a)Ultra low volume spraying.
b)Electrostatic spraying.
Date posted: April 11, 2019. Answers (1)
- Outline the factors governing the selection of the equipment for spraying pesticides application.(Solved)
Outline the factors governing the selection of the equipment for spraying pesticides application.
Date posted: April 11, 2019. Answers (1)
- Discuss how to calibrate a Knapsack sprayer.(Solved)
Discuss how to calibrate a Knapsack sprayer.
Date posted: April 11, 2019. Answers (1)
- Outline ways of modifying soil pH(Solved)
Outline ways of modifying soil pH
Date posted: April 11, 2019. Answers (1)
- Briefly explain several ways in which agriculture can indirectly contribute to creation of employment opportunities.(Solved)
Briefly explain several ways in which agriculture can indirectly contributes to creation of employment opportunities.
Date posted: April 5, 2019. Answers (1)
- What is agricultural development?(Solved)
What is agricultural development?
Date posted: April 5, 2019. Answers (1)
- Discuss criticisms of training and visit systems that hinders agricultural extentionists not to use the training and visit (T&V) approach in agricultural extension work.(Solved)
Discuss criticisms of training and visit systems that hinders agricultural extentionists not to use the training and visit (T&V) approach in agricultural extension work.
Date posted: April 5, 2019. Answers (1)
- Describe the organization and approach of Agricultural training and visits extension system approach.(Solved)
Describe the organization and approach of Agricultural training and visits extension system approach.
Date posted: April 5, 2019. Answers (1)
- Discuss the features of agricultural farming systems approach research and extension linkages(FSR&E)(Solved)
Discuss the features of agricultural farming systems approach research and extension linkages(FSR&E).
Date posted: April 5, 2019. Answers (1)
- What is a Forage Crop?(Solved)
What is a Forage Crop?
Date posted: April 4, 2019. Answers (1)
- What is pasture?(Solved)
What is pasture?
Date posted: April 4, 2019. Answers (1)
- State the disadvantages of farm mechanization(Solved)
State the disadvantages of farm mechanization
Date posted: April 4, 2019. Answers (1)
- State one use of each of the following in an engine.
(i) Generator
(ii) Infector hozzles
(iii) Air cleaner
(iv) Spark plug(Solved)
State one use of each of the following in an engine.
(i) Generator
(ii) Injector nozzles
(iii) Air cleaner
(iv) Spark plug
Date posted: April 1, 2019. Answers (1)
- Discuss mastitis under the following sub-headings.
(i) Predisposing factors.
(ii) Symptoms.
(iii) Control measures.(Solved)
Discuss mastitis under the following sub-headings.
(i) Predisposing factors.
(ii) Symptoms.
(iii) Control measures.
Date posted: April 1, 2019. Answers (1)
- State and explain materials required during honey harvesting.(Solved)
State and explain materials required during honey harvesting.
Date posted: April 1, 2019. Answers (1)
- Describe the management of a brooder.(Solved)
Describe the management of a brooder.
Date posted: April 1, 2019. Answers (1)
- The diagram below illustrates a structure used by a farmer for keeping rabbits.
Study the diagram and answer the questions that follow.
(a) Name the structure illustrated...(Solved)
The diagram below illustrates a structure used by a farmer for keeping rabbits.
Study the diagram and answer the questions that follow.
(a) Name the structure illustrated above.
(b) In which section of the structure should the water and feed troughs be placed ?
(c ) State one use of the wooden section of the structure.
(d) What additional facility should be included inside the structure for a doe ?
(e) State any two maintenance practices carried out on the structure.
Date posted: April 1, 2019. Answers (1)
- (a) One of the recommended ratios of mixing ingredients for making concrete blocks
is 1 : 3 : 4. Name the ingredients represented by the numbers...(Solved)
(a) One of the recommended ratios of mixing ingredients for making concrete blocks
is 1 : 3 : 4. Name the ingredients represented by the numbers 1, 3 and 4 in the mixture.
(b) If stronger concrete blocks were to be made, name the ingradients that would be
increased.
(c ) State three properties of concrete that make it suitable for constructing farm buildings.
(d) In addition to concrete, name three other materials that would be required to construct
the floor of a milking shed.
Date posted: April 1, 2019. Answers (1)
- The diagram below shows a farm implement. Study it and answer the questions that follow.
(a) Identify the farm implement illustrated above
(b) Name the parts labeled...(Solved)
The diagram below shows a farm implement. Study it and answer the questions that follow.
(a) Identify the farm implement illustrated above
(b) Name the parts labeled G H I
(c ) State three functions of the implement illustrated above.
(d) Name one function of the part labeled H.
Date posted: April 1, 2019. Answers (1)