-Auger bit file or a triangle file is used .Triangular should not have teeth at the corners.
-Auger bit is held firmly against the edge of the bench with the screw pointing up.
- the inside of the spurs is then filled until it forms a knife- like edge.
- The filling is done across the complete inside face of the spur rather than just on the leading edge.
- The bit is re positioned and the opposite spur filled in the same manner
marto answered the question on September 23, 2019 at 06:48
- Using sketches describe two methods of cutting veneers from logs.(Solved)
Using sketches describe two methods of cutting veneers from logs.
Date posted: September 23, 2019. Answers (1)
- Fig 2 shows an isometric view of a shaped block .Draw FULL size the three views of the object in first angle projection. (Solved)
Fig 2 shows an isometric view of a shaped block .Draw FULL size the three views of the object in first angle projection.
Date posted: September 23, 2019. Answers (1)
- The figure 1 shown represents the two orthographic views of an object .Sketch the isometric view of the object in good proportion.
(Solved)
The figure 1 shown represents the two orthographic views of an object .Sketch the isometric view of the object in good proportion.
Date posted: September 23, 2019. Answers (1)
- Name 4 parts of a bow saw and state their function.
(Solved)
Name 4 parts of a bow saw and state their function
Date posted: September 23, 2019. Answers (1)
- Give two reasons why quarter sawn timber is of better quality than timber obtained from the plain sawing method.(Solved)
Give two reasons why quarter sawn timber is of better quality than timber obtained from the plain sawing method.
Date posted: September 23, 2019. Answers (1)
- Explain briefly any three conditions that affect the rate of tree growth.(Solved)
Explain briefly any three conditions that affect the rate of tree growth.
Date posted: September 23, 2019. Answers (1)
- A sample of wood of weight 200 g weighed 180 g after being dried in a kiln for 10 hrs . Calculate the moisture content...(Solved)
A sample of wood of weight 200 g weighed 180 g after being dried in a kiln for 10 hrs . Calculate the moisture content of the sample of wood after the 10 hrs
Date posted: September 23, 2019. Answers (1)
- State the uses of the following woodwork tools
i. The drill
ii. The bredawl
(Solved)
State the uses of the following woodwork tools
i. The drill
ii. The bredawl
Date posted: September 23, 2019. Answers (1)
- State three causes of clogging when planning and describe how each can be rectified.(Solved)
State three causes of clogging when planning and describe how each can be rectified.
Date posted: September 23, 2019. Answers (1)
- Briefly describe the circumstances under which a cutting gauge may be used.(Solved)
Briefly describe the circumstances under which a cutting gauge may be used.
Date posted: September 23, 2019. Answers (1)
- Give three main reasons why heartwood is preferred to sapwood in construction.(Solved)
Give three main reasons why heartwood is preferred to sapwood in construction.
Date posted: September 23, 2019. Answers (1)
- List down four job opportunities that are in the woodwork industry for a form four school leaver can pursue.(Solved)
List down four job opportunities that are in the woodwork industry for a form four school leaver can pursue.
Date posted: September 23, 2019. Answers (1)
- State four problems that you may encounter if you used blunt tools to work in the workshop.(Solved)
State four problems that you may encounter if you used blunt tools to work in the workshop.
Date posted: September 23, 2019. Answers (1)
- State a safety hazard associated with carrying of material in the workshop when the materials are
i. heavy.
ii. large(Solved)
State a safety hazard associated with carrying of material in the workshop when the materials are
i. heavy.
ii. large
Date posted: September 23, 2019. Answers (1)