Get premium membership and access questions with answers, video lessons as well as revision papers.
-The room should be well ventilated
-The room should be free of dust
-The floor should not be slippery
-The roof should not leak
Kavungya answered the question on October 18, 2019 at 09:48
- Give the necessary precaution that you should observe when:
a)Using a chisel
b)Using a mallet(Solved)
Give the necessary precaution that you should observe when:
a)Using a chisel
b)Using a mallet
Date posted: October 18, 2019. Answers (1)
- Briefly explain the steps followed in the making of a haunched mortise and tenon joint.(Solved)
Briefly explain the steps followed in the making of a haunched mortise and tenon joint.
Date posted: September 23, 2019. Answers (1)
- Using sketches of exploded views show five different ways of making widening joints.(Solved)
Using sketches of exploded views show five different ways of making widening joints.
Date posted: September 23, 2019. Answers (1)
- Name five different widening and four framing joints used in woodwork.(Solved)
Name five different widening and four framing joints used in woodwork.
Date posted: September 23, 2019. Answers (1)
- Name two types of machines used in shaping (decorating) wood and two types used for cut out different types of joints.(Solved)
Name two types of machines used in shaping (decorating) wood and two types used for cut out different types of joints.
Date posted: September 23, 2019. Answers (1)
- List down five different tasks that can be done using a circular rip saw in woodwork.(Solved)
List down five different tasks that can be done using a circular rip saw in woodwork.
Date posted: September 23, 2019. Answers (1)
- Name any five types of machines used in woodwork besides a circular rip saw.(Solved)
Name any five types of machines used in woodwork besides a circular rip saw .
Date posted: September 23, 2019. Answers (1)
- Outline the procedure of finishing using French polish.(Solved)
Outline the procedure of finishing using French polish.
Date posted: September 23, 2019. Answers (1)
- Give three main reasons why woodworker would prefer using heartwood rather than rap wood when making woodwork projects.(Solved)
Give three main reasons why woodworker would prefer using heartwood rather than rap wood when making woodwork projects.
Date posted: September 23, 2019. Answers (1)
- List down the reasons for reconditioning a plane.(Solved)
List down the reasons for reconditioning a plane.
Date posted: September 23, 2019. Answers (1)
- Outline the procedure of sharpening auger bit spurs and state the necessary precautions.(Solved)
Outline the procedure of sharpening auger bit spurs and state the necessary precautions.
Date posted: September 23, 2019. Answers (1)
- Using sketches describe two methods of cutting veneers from logs.(Solved)
Using sketches describe two methods of cutting veneers from logs.
Date posted: September 23, 2019. Answers (1)
- Fig 2 shows an isometric view of a shaped block .Draw FULL size the three views of the object in first angle projection. (Solved)
Fig 2 shows an isometric view of a shaped block .Draw FULL size the three views of the object in first angle projection.
Date posted: September 23, 2019. Answers (1)
- The figure 1 shown represents the two orthographic views of an object .Sketch the isometric view of the object in good proportion.
(Solved)
The figure 1 shown represents the two orthographic views of an object .Sketch the isometric view of the object in good proportion.
Date posted: September 23, 2019. Answers (1)
- Name 4 parts of a bow saw and state their function.
(Solved)
Name 4 parts of a bow saw and state their function
Date posted: September 23, 2019. Answers (1)
- Give two reasons why quarter sawn timber is of better quality than timber obtained from the plain sawing method.(Solved)
Give two reasons why quarter sawn timber is of better quality than timber obtained from the plain sawing method.
Date posted: September 23, 2019. Answers (1)
- Explain briefly any three conditions that affect the rate of tree growth.(Solved)
Explain briefly any three conditions that affect the rate of tree growth.
Date posted: September 23, 2019. Answers (1)
- A sample of wood of weight 200 g weighed 180 g after being dried in a kiln for 10 hrs . Calculate the moisture content...(Solved)
A sample of wood of weight 200 g weighed 180 g after being dried in a kiln for 10 hrs . Calculate the moisture content of the sample of wood after the 10 hrs
Date posted: September 23, 2019. Answers (1)
- State the uses of the following woodwork tools
i. The drill
ii. The bredawl
(Solved)
State the uses of the following woodwork tools
i. The drill
ii. The bredawl
Date posted: September 23, 2019. Answers (1)
- State three causes of clogging when planning and describe how each can be rectified.(Solved)
State three causes of clogging when planning and describe how each can be rectified.
Date posted: September 23, 2019. Answers (1)