a) pottery – joining slabs
b) Gather required materials – slip, slabs, scoring tools etc.
-Rough /scratch the two surfaces to be joined use the scoring tool, brush / folk
-Apply slip on one of the surfaces using the brush / fingers
-Gently press the two surfaces together until slip oozes out
-Using clay tools / fingers,smoothen the seams – the two slabs are joined.
Kavungya answered the question on October 18, 2019 at 12:24
- Explain the following terms used in weaving
a)Shed
b)Shuttle
c)Beater
d)Plain weave
e)Loom (Solved)
Explain the following terms used in weaving
a)Shed
b)Shuttle
c)Beater
d)Plain weave
e)Loom
Date posted: October 18, 2019. Answers (1)
- Mention two factors which dictate the decoration of a fabric. (Solved)
Mention two factors which dictate the decoration of a fabric.
Date posted: October 18, 2019. Answers (1)
- Define soft sculpture and state two of its functions. (Solved)
Define soft sculpture and state two of its functions.
Date posted: October 18, 2019. Answers (1)
- Processes in making ornaments are varied, name any three. (Solved)
Processes in making ornaments are varied, name any three.
Date posted: October 18, 2019. Answers (1)
- Mention two contents of Music Compact Disc (CD) cover. (Solved)
Mention two contents of Music Compact Disc (CD) cover.
Date posted: October 18, 2019. Answers (1)
- Identify the method used to produce the type of print shown below. Explain how it was produce.(Solved)
Identify the method used to produce the type of print shown below. Explain how it was produce.
Date posted: October 18, 2019. Answers (1)
- Identify two outstanding characteristic of a collage work. (Solved)
Identify two outstanding characteristic of a collage work.
Date posted: October 18, 2019. Answers (1)
- Give two important value of sketches. (Solved)
Give two important value of sketches.
Date posted: October 18, 2019. Answers (1)
- Explain the term chiaroscuro in reference to drawing. (Solved)
Explain the term chiaroscuro in reference to drawing.
Date posted: October 18, 2019. Answers (1)
- Study the form below.
Identify the most dominant element used. Name the most outstanding technique used to define the forms.(Solved)
Study the form below.
Identify the most dominant element used. Name the most outstanding technique used to define the forms.
Date posted: October 18, 2019. Answers (1)
- Urban lifestyle may not provide adequate outdoor space for cloth lines. This compels the house occupants to utilize any available space inside the house to...(Solved)
Urban lifestyle may not provide adequate outdoor space for cloth lines. This compels the house occupants to utilize any available space inside the house to hang washed clothes to dry.
Design a suitable device that can hold several hanging lines considering the following:
i) the device should be collapsible for ease of movement and storage;
ii) it should be stable and strong enough to hold clothes to dry;
iii) it should be adjustable to different heights.
REQUIREMENTS
(a) Make freehand pictorial sketches of two possible designs of the device.
(b) Select one of the designs in (a) above and make a refined pictorial sketch and label two parts.
(c) Make detailed exploded sketches of the mechanisms used in considerations i and iii above.
(d) (i) List two different materials used in the device.
(ii) State one reason for the choice of each material.
(e) List two methods that could be used in joining the parts of the device and state where each is applied.
Date posted: October 17, 2019. Answers (1)
- Figure below shows a branch pipe A connected to a conical shaped base of a chimney B.
Draw the curves of interpenetration between the pipe and...(Solved)
Figure below shows a branch pipe A connected to a conical shaped base of a chimney B.
Draw the curves of interpenetration between the pipe and the conical base in:
a)Plan
b)Elevation
Date posted: October 17, 2019. Answers (1)
- In the mechanism shown in figure below, the crank EF rotates about centre E while GH oscillates about G.
Plot the locus of point P for...(Solved)
In the mechanism shown in figure below, the crank EF rotates about centre E while GH oscillates about G.
Plot the locus of point P for one complete revolution of EF.
Date posted: October 17, 2019. Answers (1)
- Figure below shows the three orthographic views of a machined block drawn in first angle projection.
Draw full size, the isometric view of the block taking...(Solved)
Figure below shows the three orthographic views of a machined block drawn in first angle projection.
Draw full size, the isometric view of the block taking corner X as the lowest point.
Date posted: October 17, 2019. Answers (1)
- Figure below shows parts of a machined component drawn in first angle projection.
Assemble the parts and draw the following:
a)Sectional front elevation through the cutting plane...(Solved)
Figure below shows parts of a machined component drawn in first angle projection.
Assemble the parts and draw the following:
a)Sectional front elevation through the cutting plane F-F.
b)The plan.
Date posted: October 17, 2019. Answers (1)
- Figure below shows two views of a shaped block drawn in first angle projection. Sketch the third view by projecting from the given views.(Solved)
Figure below shows two views of a shaped block drawn in first angle projection. Sketch the third view by projecting from the given views.
Date posted: October 17, 2019. Answers (1)
- A right square pyramid is truncated along X-X and Y –Y as shown in figure below.
Complete the plan (Solved)
A right square pyramid is truncated along X-X and Y –Y as shown in figure below.
Complete the plan
Date posted: October 17, 2019. Answers (1)
- The following lines were drawn using different scale.
Determine the distance represented by each line using the given scale.
i)Line AB if the scale used is 1:2
ii)Line...(Solved)
The following lines were drawn using different scale.
Determine the distance represented by each line using the given scale.
i)Line AB if the scale used is 1:2
ii)Line CD if the scale used is 2:1
Date posted: October 17, 2019. Answers (1)
- Construct an internal common tangent to the circle given in figure below.(Solved)
Construct an internal common tangent to the circle given in figure below.
Date posted: October 17, 2019. Answers (1)
- Figure below shows two views of a block drawn in first angle projection. In good proportionality sketch the block in oblique projection.(Solved)
Figure below shows two views of a block drawn in first angle projection. In good proportionality sketch the block in oblique projection.
Date posted: October 17, 2019. Answers (1)